Configuring your Loggers

A logger will only send new temperature data to LogTag^® Online if it is actively recording temperature data. For this, it is necessary to configure the logger for logging. This will set parameters such as logging interval, alarm thresholds, alarm trigger conditions and -in case of a UTRED30-WIFI-wireless network connection parameters.

Loggers are configured using LogTag^® LT Online 3. Follow these steps to complete the configuration process:

• Open LogTag^® LT Online 3, if required download it from the software download page on the LogTag^® website and install it.
• Connect the logger to your PC, using a USB interface (or a USB cable for the UTRED30-WIFI)
• Configure the logger
• Start the logger.

You can find more information about installing and using LogTag^® LT Online 3 from its online help.